Sunday, February 26, 2017

Fourth Wood Stove Competition to focus on automation and electricity generation

Today, the Alliance for Green Heat announced the fourth Wood Stove Design Challenge, returning to the National Mall in Washington, DC in November 2018. 

The 2018 event will be free and open to the public and includes rigorous testing of the next generation of technology that can make wood stoves consistently cleaner, more efficient, easier to use and, like solar energy, a renewable source of electricity.

The fourth Wood Stove Design Challenge is modeled after the Department of Energy’s (DOE’s) Solar Decathlon, a competition between teams from universities worldwide to design more efficient and cheaper residential solar power.  Like the Solar Decathlon, the Wood Stove Challenge also attracts teams from around the world and focuses energy and resources on innovation and improved performance.  The stove competitions have been in partnership with the DOE Brookhaven National Lab, the New York State Energy Research and Development Administration (NYSERDA), the US Forest Service and others, the Osprey Foundation, among others. 

Participants will compete in two events:  One is to automate the wood stove with 21st century technology like sensors and WIFI-enabled controls that improve combustion efficiency, reduce air pollution and improve ease of use.   The second competition will focus on thermoelectric wood stoves that generate electricity to power lights, cell phones, and WIFI-enabled controls. Thermoelectric generators are similar to solar PV systems except they turn heat instead of light into electricity.  When integrated with a residential solar PV system, a thermoelectric wood stove and battery power system, like the TESLA Powerwall, could effectively double the wintertime output of solar PV system in areas like northern United States, Canada and northern Europe.

Wood stoves are still used by 30 – 60% of homes in hundreds of rural and suburban counties around the country.  Yet, the technology revolution that has swept household appliances in the last 20 years has by-passed wood stove technology. 


Teams in the 2018 stove challenge will be competing for up to $50,000 in prizes.  The teams and exhibitors will also have a chance to showcase new technology on the National Mall just blocks away from the Department of Energy, the US Department of Agriculture and the Environmental Protection Agency. 

“This is a chance for students, back yard inventors, and wood stove manufacturers to re-invent this age-old technology for today’s environmentally conscious and time-conscious consumer,” said John Ackerly, founder of the Wood Stove Competition and President of the Alliance for Green Heat.  “An affordable, smart wood stove is achievable and could help millions of families reduce their reliance on gas and oil while significantly reducing  pollution,” Ackerly added.

“This is the first Wood Stove Challenge to promote wood stoves that generate electricity to power everything from a cell phone to an entire home.  Thermoelectric wood stoves, when integrated with solar PV systems and home batteries like the TESLA Powerwall, have the potential to make solar energy more affordable, reduce air pollution, and pave the way for a more sustainable energy future, “according to Ken Adler, Senior Technology Advisor at the Alliance for Green Heat and formerly with the U.S. EPA.

Previous Stove Design Challenges brought innovative stoves and a diverse array of stove and energy experts together on the National Mall in 2013, Brookhaven National Lab in 2014 and 2016.

Further details about participating and competing in this competition will be available late March, 2017. For more information about the  2018 competition, contact John Ackerly at jackery@forgreenheat.org. For inquiries specific to the electricity production category, contact Ken Adler at kadler@forgreenheat.org.

#   #   #
The Alliance for Green Heat promotes modern wood and pellet heating systems as a low-carbon, sustainable and affordable energy solution. The Alliance works to advance cleaner and more efficient residential heating technology and hosts international stove design competitions to accelerate innovative stove technology.  Founded in Maryland in 2009, the Alliance is an independent non-profit organization and is tax-exempt under section 501c3 of the tax code.



Thursday, February 23, 2017

Wood and pellet stove prices rise 3% in wake of new EPA regulations


Since the EPA announced stricter emissions regulations for wood and pellet stoves, prices increased by an average of 3% over a two-year period when adjusted for inflation, based on a review of 77 popular stove models. Without inflation, prices increased by an average of 4%.





The Alliance for Green Heat, an independent non-profit focused on the wood and pellet heating sector, tracked retail prices for 77 wood and pellet stoves over a two-year period, from February 2015 to February 2017. The EPA announced new regulations on February 3rd and they took effect on May 15, 2015. Even stricter emission limits are set for 2020 and the Alliance will continue to track prices through 2020 and beyond.

We identified 77 stoves made by 7 popular brands with varying price points: Jotul, Blaze King, Harman, Quadrafire, Woodstock Soapstone, Hearthstone, US Stove, and Englander.

It is impossible to tell how much regulations contributed to the 3% price rise, although each of the 7 brands are going through periods of increased R&D as they work towards complying with the 2020 emission limits. The EPA set a maximum of 7.5 grams an hour in 1990, 4.5 in 2015 and 2.0 or 2.5 grams in 2020. Most stoves already met the 4.5 gram limit in 2015, but most do not meet the 2020 limits. It is possible that some companies are starting to pass those costs along to consumers.

There may be steeper price rises as 2020 approaches and companies have to begin more intensive R&D and certification testing.  However, industry is pushing a bill in Congress to delay the 2020 emission standards to 2023.  The Hearth, Patio & Barbecue Association is also suing the EPA to block the 2020 emission standards for boilers and furnaces, but not necessarily for stoves.  The bill in Congress is partially designed to give the litigation enough time to get through the courts.  

We tracked the retail prices of 59 wood stoves and 18 pellet stoves using the sale or final price of the stove listed on the retailer’s website. Overall, the 59 wood stove retail prices rose an average of 4% ($80) or 3% ($45) when accounting for inflation. The pellet stove category saw a greater average price increase of 5% ($106) or 3% ($66) per stove when accounting for inflation.
  • Four-fifths of the 77 wood and pellet stoves increased in price over the two years. Of these, the average price increase was 6% ($125) or 5% ($90) when adjusting for inflation.
  • About one-fifth of the 77 stoves did not go up in price between February 2015 and 2017. The majority of the Englander and Blaze King models we tracked stayed the same price.
  • Four wood stoves out of 77 wood and pellet stoves -- one Jotul, two Hearthstone, and one US Stove -- declined in price. The average decline was 6% ($250).
The EPA is required by law to do an economic regulatory impact analysis (PDF) and determine if the costs of the regulation outweigh the benefits. The EPA predicted slightly higher retail costs, and as a result, a slight decline in demand for new stoves. However, on balance they estimated that the overall health and other benefits vastly outweigh the costs.

Some commentators, members of Congress and editors claimed the EPA regulations would make wood stove prices rise sharply and be unaffordable for the average American.

The EPA also is required to assess the impact of the regulation on small businesses, since more than 90% of stove manufacturers and retailers are small firms. The U.S. Census Bureau reports that the industry employed 15,911 workers in 2011.

Price changes by brand and stove type

The wood stoves with the highest price decreases, Hearthstone’s Bari 8170 and Lima 8150, which declined in price by $620 and $300 respectively, were the priced the highest of any stove on our list in 2015 at $4,999 and $5,299. No pellet stove we tracked declined in price in 2017 and the only two pellet stoves did not increase in price in 2017 (both Englanders priced between $1,000 and $2,000).

Wood stove price increases ranged from 1% (Hearthstone Castleton 8030 and Craftsbury 8391) to 35% (US Stove’s Large Woodstove). Among the wood stoves that increased in price between 2015 and 2017, the average increase was around $125 or 6% more than the 2015 price. Seven of the nine pellet stoves that rose in price increased by an even $100, regardless of their 2015 price, which represented a 3-4% increase. All five of the Harman pellet stoves, which retailed between $2,999 and $3,999 retail in 2015, were listed $100 higher by the same retailer in 2017.

For the sake of consistency, we only used stove prices at one or at most two retailers per brand. We used final or sale prices rather than “suggested retail price” or “regular price” when given. The number of stoves we selected per brand varied based on the number of models available in 2015 and the number of models that continued to be sold by that retailer in 2017.

Englander and US Stove had some of the lowest prices stoves we began tracking in 2015, with a median price of about $1,000. At about the middle were the brands Woodstock Soapstone (median price of $2,400), Quadrafire ($2,550), and Jotul ($2,700). The more expensive stove brands included our study, based on median prices, were Hearthstone ($2,900), Blaze King ($2,950), and Harman ($3,000).

Four out of five Blaze King stoves, three out of four Englander wood stoves and all (two) Englander pellet stoves did not increase in price over these two years. The sixteen Hearthstone wood and pellet stoves we tracked declined in price by an average of 1% ($3.75) per stove, thanks in great part to large drop in price for two of the brand’s priciest ($5,000+) wood stoves.

As for the brands that increased their prices, Jotul’s 19 wood stoves increased by an average of 3% ($79) each. Quadrafire’s and Harman’s wood and pellet stoves both increased by an average of 4% each ($101 for Quadrafire, $122 for Harman). Harman’s wood and pellet stoves increased in price by an average of $122 per stove. US Stove and Woodstock Soapstone had the greatest average price increases of any brand at 15% each (Woodstock Soapstone has frequent sales which we did not take into account). US Stove’s stove prices increased by an average of $155 per stove and Woodstock Soapstone’s increased by an average of $408 per stove.

The EPA regulations had a much larger impact on prices on companies making unregulated outdoor wood boilers and unregulated wood furnaces.  Prices for boilers rose at a sharper rate than stoves, although we did not track those prices and cannot offer any estimates.

Tuesday, February 14, 2017

States strive to update outdoor wood boiler regulations to conform to new federal rules

The EPA’s new wood heater regulations has left more than 10 states with outdoor boiler regulations that now need updating. Most state regulations refer to Phase 1 and Phase 2 boilers, a voluntary program that has now been superseded by certified boilers in new EPA regulations.  

Currently, at least New Hampshire and Maryland are updating regulations and the province of British Columbia already incorporated language for the new EPA certified boilers.

The wording in these regulations is often tricky and several states have created unintentional results in the past, such as Maryland whose regulations only allowed Phase 2 outdoor boilers to be installed, effectively prohibiting the installation of far cleaner and more efficient indoor pellet boilers.

Scott Nichols, owner of Tarm biomass in Orford New Hampshire, is working with New Hampshire officials to avoid unintentional results.  One issue, for example, is his recommendation to maintain the exemption for outdoor pellet boilers from property line set back rules, an exemption in place since 2010.  Most states that regulate outdoor boilers have established set backs, from 50 to more than 200 feet. 


This shows the set back and stack height rules in Fairbanks, Alaska, one of more than 100 towns and counties that established local ordinances, albeit years after many boilers were already installed too close to other homes, schools and business.
The Alliance for Green Heat is urging states to retain or establish property line set backs for outdoor wood boilers, including the new certified ones, since they can still emit excessive smoke if they are loaded with unsplit, unseasoned wood.  “We recommend a minimum of 50 feet from the property line and 150 feet from the nearest neighboring residence for certified wood boilers and more for non-certified ones,” said John Ackerly, President of the Alliance for Green Heat. Towns and counties with deep valleys or where weather inversions are common will likely need far bigger set-backs.

As of mid-February, 2017, New Hampshire is proposing 50 foot set-backs for certified cord wood boilers, but Maryland’s draft did not include any set backs.

Another key issue for states is ensuring that only certified outdoor boilers are allowed for both residential and commercial use.  Unless states stipulate that all new installations be certified, unregulated boilers could still be installed in residential areas for commercial purposes, such as a chicken house or greenhouse.  The EPA does not regulate outdoor wood boilers that are used for commercial purposes.  Boiler manufacturers can sell unregulated boilers to homeowners who do not have any registered business, as long as they sign a form saying the boiler will only be hooked up to a greenhouse or garage, and not connected to the home.  If the homeowner connects the boiler to the house, the signed form protects the manufacturer from liability.

Another issue that retailers of modern indoor certified wood and pellet boilers are concerned with is the definition of outdoor boiler. “The EPA definition is poorly written and is a dragnet that catches every boiler in existence since any boiler can be installed outside or in a structure not normally occupied by humans” Scott Nichols said.  New Hampshire agreed and changed their regulations to specify that outdoor boilers are those boilers that are required to be installed outside, so as not to include indoor boilers that happen to be installed in a garage, for example. Nichols is urging “all states to change their definitions for OWHH as New Hampshire has.”

The EPA’s former voluntary qualification program and recent certification program for outdoor wood boilers (hydronic heaters) has helped to reduce particulate matter when the boilers are operated responsibly.  In addition to stricter emission standards, most certified boilers now have controls that help ensure better combustion throughout the burn cycle and reduce the impacts of cycling. 

However, many experts and state and local air quality agencies remain concerned that EPA-qualified Phase 2 and EPA certified boilers can produce excessive smoke in the hands of many operators.  One major policy response has been to establish set backs from property lines and/or nearby residences.  Most states where outdoor boilers are popularwith the exception of the Great Lake states where most outdoor boiler manufacturers are locatedmaintain set backs.  set backs help ensure that outdoor wood boilers are not installed in densely inhabited areas and even in rural areas, they provide a buffer with the immediate neighbors.


Property line set backs: The most common type of set backs are property line set backs.  They typically range from 50 to 200 feet, with 100 feet being the most common.  Maine, Massachusetts, New Hampshire, New York, Pennsylvania, Utah, and British Columbia all use property line set backs.

Set back from nearest neighboring residence: Connecticut and Vermont are the only two states that use set back from the nearest neighbor’s residence.  They both require 200 feet, representing stricter rules.

Both property line and nearest residence: Maine and Massachusetts use both property line and nearest residence.  For EPA Phase 2 boilers, Maine requires 50 feet from the property line or 70 feet from a neighbor’s house.  Massachusetts requires 50 feet from a property line and 75 feet from nearest home.

Seasonal restrictions: Two states, Indiana and Massachusetts, do not allow outdoor boilers to operate in the summer as they can cause even more pollution in warmer weather when they are likely to cycle on and off more frequently.  In addition, Maryland recently wrote draft regulations that would restrict use from May 1 to September 30.

Stack heights: Most states that require set backs also require minimum stack heights.  (This memo does not address these.)

Sunset clauses: Most state rules only apply to future installations, but some, such as Vermont and British Columbia, have sunset clauses for conventional boilers.  In British Columbia, only EPA certified and Phase 2 boilers can be operated after November 1, 2026.

Connecticut

Connecticut Law
CGS § 22a-174k, enacted in 2005, bans the installation or operation of OWBs that do not meet certain requirements. A violation of the law is an infraction.
With a few exceptions, the law prohibits anyone from building, installing, establishing, modifying, operating, or using an OWB until EPA regulations governing them take effect.
The law allows OWBs if they were either built, modified or in use before July 8, 2005; or they
1. are installed at least 200 feet from the nearest neighboring home;

Maine

DEP INFORMATION SHEET Regulation of Outdoor Wood Boilers , Effective Date: November 9, 2007 Contact: 1-800-452-1942 or 207-287-2437 Amended: July 4, 2008
SITE SETBACK REQUIREMENTS
OWB installations need to meet minimum setback requirements designed to protect public health. The setback distance required depends on the unit’s emission rating, with reduced setbacks allowed for cleaner-burning OWB models. The setback table below lists the minimum distance an OWB unit needs to be from any neighboring property line or dwelling. Buyers should carefully consider whether their property configuration provides the necessary space to meet the setback requirements before purchasing a boiler unit.

OWB Emission Rating
(in pounds per million BTUs or lbs/MMBtu)
Minimum Setback Distances
from Property Line OR from Dwelling
0.32 lbs/MMBtu
50 feet OR 70 feet
0.60 lbs/MMBtu
100 feet OR 120 feet
>0.60 lbs/MMBtu (including uncertified OWBs)
250 feet OR 270 feet


Massachusetts
310 CMR 7.26(50) Outdoor Hydronic Heaters


On and after December 26, 2008 no person shall:

1.     Site or install a residential-size outdoor hydronic heater that meets the emission standard defined in 310 CMR 7.26(53)(a), unless it is installed at least 50 feet from any property line and 75 feet from any occupied dwelling that it is not serving, at the time of installation.

New Hampshire 

125-R:3 Setback and Stack Height Requirements. –
   I. No person shall install a Phase I OWHH unless it is installed at least 100 feet from the nearest property line and has a permanent attached stack that is at least 2 feet higher than the peak of the roof of a residence or place of business not served by the OWHH if that residence or place of business is located within 300 feet of the OWHH.
    II. No person shall install a Phase II OWHH unless it is at least 50 feet from the nearest property line.
    III. No person shall install an OWHH that is not a Phase I or Phase II OWHH unless it is located at least 200 feet from the nearest abutting residence and has a permanent attached stack that is at least 2 feet higher than the peak of the roof of a residence or place of business not served by the OWHH if that residence or place of business is located within 300 feet of the OWHH.
Source. 2008, 362:2, eff. Aug. 10, 2008.

New York
6 CRR-NY 247.4
NY-CRR

SUBCHAPTER A. PREVENTION AND CONTROL OF AIR CONTAMINATION AND AIR POLLUTION
PART 247. OUTDOOR WOOD BOILERS

All new OWBs must meet minimum setback requirements. Residential-size new OWBs (thermal output ratings of 250,000 British thermal units per hour (Btu/h) or less) must be sited 100 feet or more from the nearest property boundary line. Commercial-size new OWBs (thermal output ratings greater than 250,000 Btu/h) must be sited 200 feet or more from the nearest property boundary line, 300 feet from the nearest property boundary line of a residentially-zoned property and 1,000 feet or more from a school.

Pennsylvania

Title 25—ENVIRONMENTAL PROTECTION
ENVIRONMENTAL QUALITY BOARD
[25 PA.CODE CHS. 121 AND 123]
Outdoor Wood-Fired Boilers
[40 Pa.B. 5571]
[Saturday, October 2, 2010]
Under final-form subsection (d), regarding setback requirements for new Phase 2 outdoor wood-fired boilers, a person may not install, use or operate a new Phase 2 OWB unless the boiler is installed a minimum of 50 feet from the nearest property line.

Vermont
 
ADOPTED RULE – Effective Date: July 5, 2014 
                          AGENCY OF NATURAL RESOURCES                               Montpelier, Vermont 
                     ENVIRONMENTAL PROTECTION REGULATIONS                                    CHAPTER 5                              AIR POLLUTION CONTROL 

1.     Installation Requirements
(i) After October 1,1997, no person shall install or allow the installation of any OWB that is not a Phase I OWB or a Phase II OWB unless the OWB:
  1. (A)  Is located more than 200 feet from any residence that is neither served by the OWB nor owned by the owner or lessee of the OWB; and,
Utah

R307. Environmental Quality, Air Quality.
Rule R307-208. Outdoor Wood Boilers.
As in effect on January 1, 2017

(2) No person shall operate an outdoor wood boiler within 1000 feet of a private or public school, hospital or day care facility.
(3) Setback. A new residential outdoor wood boiler shall not be located less than 100 feet from the nearest property boundary line. A new commercial outdoor wood boiler shall not be located less than 200 feet from the nearest property boundary nor 300 feet from a property boundary of a residentially zoned property.


British Columbia (Canada)

PROVINCE OF BRITISH COLUMBIA
ORDER OF THE LIEUTENANT GOVERNOR IN COUNCIL

Order in Council No. 650 , Sept. 19 2016
Boilers -setback and operational requirements
7 (1) In this section, "installed" means installed outdoors or m a structure not ordinarily used as living space.

(2)  An owner of a parcel must ensure that a boiler that is installed on the parcel after November I, 2016 but before May 1, 2017 is installed as follows:
(a) if the boiler is a certified boiler or a phase 2 qualified boiler, not less than 40 m [131 feet] from each of the parcel's boundaries;
(b) in any other case, not less than 80 m [262 feet] from each of the parcel's boundaries.

(3)  An owner of a parcel must ensure that a boiler that is installed on the parcel on or after May 1, 2017 is
(a) a certified boiler, and
(b) installed not less than 40 m from each of the parcel's boundaries.
(4)  Despite subsections (2) (a) and (3), if the certified boiler is designed to bum only pelletized fuel, the boiler must be installed not Jess than I0 m [32 feet] from each of the parcel's boundaries.
(5)  A person must not operate a boiler installed contrary to subsection (2) (a) or (b), (3) or (4).

(6)  On and after November 1, 2026, a person must not operate an installed boiler unless the boiler is a certified boiler or a phase 2 qualified boiler.